Automobile paint blistering is a common problem of automobile paint surface, which seriously affects the car beauty. How to deal with the blistering of automobile paint surface? Let's look at the blistering treatment of the car paint.
How to deal with the blistering of automobile paint surface
1. Construction conditions and process are not rigorous
The construction conditions and technology of paint are required to be high. No moisture is allowed on the paint surface before painting; The previous paint surface filling ash (atomic ash) needs to be thoroughly dried in dry environment to enter the paint room for painting; The air pipe connected by spray gun must be kept dry and not allowed to have any moisture. The above points are also the important reasons for the blistering of automobile paint surface.
2. Poor quality of paint
This kind of problem often occurs in the roadside shop outside, which often makes paint at very low price, because they use low-quality paint, which is sprayed on the car, and the quality produced can be imagined.
3. Paint is too thick
The paint is not paid more attention to or the construction personnel's technology is limited, which will lead to the overall thickness of the paint too thick and the paint body flowing down. In addition, the polishing in the later period is not handled well, and the future paint surface blistering will be buried with a brush.
How to deal with the blistering of automobile paint surface
Above introduces the automobile paint surface blister how to deal with the relevant content, next to see how to maintain the car paint.
No.1 sealing glaze
Besides the function of wax, the sealing glaze can increase the strength of paint and prevent the small scratches caused by the wind sand hitting the body. The retention time is relatively long, which can reach about 3 to 4 months.
Consumer advice: the glaze package launched by auto beauty shop is basically made in years, several times. When sealing glaze for the first time, all kinds of oxides, asphalt, mosquito carcasses and scratches on the body will be completely removed by polishing. However, in the subsequent glaze sealing process, do not let beauty shops frequently use polishing, even if it needs to be used, it is better to use it locally, then glaze and finally seal the glaze (glaze products can be overlaid on the vehicle paint). The price is generally around 800 yuan / year.
No.2 waxing
Waxing is one of the most traditional and economical methods of car paint protection. The main function is to inhibit the oxidation of harmful components to the car paint, anti ultraviolet rays, and can improve the brightness of the paint. But the maintenance time is short, generally about 1 month, and afraid of water, rain or car washing will lose effect.
Consumption suggestion: car wax products are very cheap, a box of wax price is generally about 100-300 yuan, can be used 20-30 times. It is suggested that consumers can buy car wax by themselves. The price of the wax is better than 150 yuan, and then go to the beauty shop for processing, and process about 20-30 yuan / time (some beauty shops buy Wax for free processing); DIY can also be carried out. First, the car can be cleaned without water collection. Roll the vehicle on the body with "clay" (about 100 yuan), stick down the attachment and stains on the body, and then wax the body evenly in the way of rotation. Wait for 10-20 minutes. After the white matter is produced on the surface of the paint, wipe it up and down according to the water flow direction with a dry cotton towel. Try not to wax the new car.
Because the time of keeping is short, wax is needed frequently, which is more troublesome than before it can be effective if it is insisted. No polishing, no scratches, etc.