FEATURES: Adopting professional imported materials, especially the super propellant, 4-X CARBURETOR &CHOKE CLEANER can efficiently and thoroughly remove grease dirt, gum and carbon deposit formed during combustion inside and outside of the carburetor, choke, linkage, PCV valves, heat risers, the spark plugs and the entire system while lubricating and removing moisture on all moving parts without disassembling them, so as to effectively improve the engine performance, horsepower and combustion efficiency, saving oil and decreasing gas pollution. It is harmless for binary catalytic cracker and oxygen sensor.
DIRECTIONS: ●Take down the air filter on the carburetor. ●Start the engine and keep it running at an idle speed. ●Shake this product fully and then set the injection pipe on the fuel injector. ●Spray some of the liquid (around 1/3) into the floating chamber through balance hole, thus clean the orifice oil way. ●Spray some of the liquid (around 1/3) in the choke or the inner wall of carburetor. ●Spray the rest of liquid on the outside surface of the carburetor to clean sludge and colloid. ●It is suggested that the carburetor be maintained or cared per driving range of 6000km.
CAUTIONS: ●Prolonged exposure to sunlight or heat may cause bursting. ●Do not puncture or incinerate container. ●Do not expose to heat or store at temperatures above 120F/40℃. ●Avoid contact with eyes. ●Apply at a well-ventilated place. ●KEEP OUT OF THE REACH OF CHILDREN!
FIRST AID: For eye contact, flush thoroughly with running water for 15 minutes.
CAN CONSIDERATIONS: Put the used can up side down into a carton or over a piece of newspaper, press the sprayer for 2 minutes to discharge the remaining liquid. In certain circumstances, open the top cap and clear it up.
