Car paint scratches are inevitable, little scratches are definitely a lot of owners of the heart forever pain. As a result, all kinds of paint repair products will emerge in an endless stream, the fight is who can make the paint "beautiful".

      Traditional abrasives are usually oily，Grinding particles are also large, grinding process is easy to cause a ring effect on the paint surface. Therefore, the so-called repair only covers up the scratches rather than eliminating them.

      Shike abrasives are all water-based，After use, the paint becomes very fine and does not produce a ring effect. Compared to the traditional oil abrasive products, it also has a better performance in durability. In addition, traditional abrasives produce more dust during the grinding process, which is very harmful to the respiratory health of beauty technicians, while water-based products like Shik Abrasives do not have this problem.

Lion Magic Abrasives

product：X-801   /   X-801A  

features：With high efficiency grinding formula, it can quickly and safely remove paint defects, smooth construction, less splash and dust, especially can quickly remove scratches and oxides. Abrasives can be cut into quickly, automatically decompose into fine abrasive particles, safe to use, the effect is remarkable.

Understanding of abrasive:

1、abrasives: Contains abrasive particles to remove deep oxide layers and scratches and pitting and vertical flow when painting.

2、Repair agent：Smaller than abrasive particles, can remove the light scratches in the paint, play a role in care brightening, also called medium polish.

3、Reducing agent：Smaller than the repair agent, also known as the mirror treatment agent. It has the effect of removing oxide layer and pattern, matte, rainbow pattern and brightening, as the final process of polishing.

Polishing process:

1, cleaning the vehicle 2, grinding mud 3, adhesive strip, sign using the United States paper cover treatment 4, rough grinding 5, rough grinding 6, mirror reduction 7, the whole car inspection

Construction matters needing attention and treatment methods:

1. It should be constructed in a cool and less sand place. It is best to polish at room temperature to avoid overheating and dust too much to affect the polishing effect.

2, polishing machine boot or shutdown must not contact the car paint surface.

3, polishing need to adjust the speed of the polishing machine, the construction must move quickly, can not hold or stop in a place for a long time to grind, if the heat produced by the polishing machine and the paint surface more than the paint surface can withstand the heat, will cause the car paint thrown off the serious consequences. Therefore, there must be sufficient abrasives and polish lubrication. The machine is polished to keep the speed below 1800 RPM and the temperature below 65 degrees.

4, hold the position of the polishing machine, the right hand holding the machine, the left hand holding the handle, the wire on the shoulder, according to the car paint surface to choose the appropriate position, as far as possible the best construction, keep the direction of the polishing machine.

5. Don't get too close to bezels, bumpers and other plastic parts. Parts of the operation.

      Note: After polishing, if the pattern, matte and rainbow lines are produced due to improper operation, they are generally caused by the following reasons:

(1) improper choice of abrasive.

(2) Too much use of coarse abrasive

(3) do not grasp the polishing machine and paint surface strength and lubrication degree.

Treatment method: use reducing agent, re - polishing.

     Shike magic reducing agent products, can make the body paint to achieve the mirror effect as bright as a mirror, with the use of Shike professional polishing machine, wool plate, sponge plate for professional construction effect is better.

At present, there are only three kinds of polishing discs used in polishing machines: wool disc, coarse sponge disc and soft sponge disc.

Wool discs and coarse sponge discs are used for polishing and grinding occasions, while soft sponge discs have concave and convex orderly wavy shape, which is conducive to the restoration of the paint surface, forming a glossy paint surface like a mirror. Remember to use them differently when polishing.

   Shike paint surface grinding products, for your car to do a good job "face" problem!